Behringer CH Series Hygienic Tube Supports

The innovative CH Series hangers design was developed with the input of engineers, contractors, end users, and Behringer's strong understanding of hygienic tube and pipe applications. These compact high purity hangers answer the industry concerns, while incorporating several contractor time-saving benefits.

The tension ring connection on the dynamic hanger allows the clamp bodies to self adjust, independent of the handing rod, to the tube's slope. This attribute reduces internal stress on the tube, as well as eliminating an entire step during slope adjustment. The ability to make these adjustments while the hanger is secured to the tubing eliminates the step of retesting the slope after the hangers have been mounted.

The combined use of the CH, CHT, CHR, and CHW supports along with the telescoping stanchions permits line adjustment in the x, y, and z axes. In addition, CH hangers are packaged and installed as a one piece unit. This means no loose parts and no gathering pieces and assembling components on ladders and space restricted areas. These benefits ultimately lead to a consistent, high-quality installation.

Models

  • CH Dynamic
  • CHT Rigid Threaded
  • CHR Rigid Bar
  • CHW Rigid Weld Plate
  • Threaded Support Rod
CH Dynamic Mount Hanger

This is a one piece unit with an attached dynamic rod. Hanger rods are available in lengths ranging from a minimum of 1.26 inches to a maximum of 96 inches. Standard length is six inches. A dynamic union between the hanger rod and hanger housing allows for the housing to self adjust to the tube's slope for drainability, as well as a 360° swivel. A six inch rod is the standard length, with other lengths available. CH Dynamic Mount Hanger can also be used in combination with the Rod Stand Plate, Hang Mount Stanchion, or Floor Mount Stanchion. This combination will allow the support to be adjusted telescopically to the tube or pipe elevation. Call CSI's customer service at 800.654.5635 for the price and availability of special rod lengths.

Size Range0.24 inch diameters through six inch diameter covering imperial tube, pipe, and copper sizes. ISO and DIN standards and special diameters are available upon request.
Hardware             304 stainless steel (standard), 316 stainless steel 
FinishStainless steel at a 25 RA
PlasticPolysulfone (black = anchor and gray = guide*)

*A guide allows free axial movement for thermal expansion of tube or pipe.

CHT Threaded Mount Hanger

This is a one piece unit with threaded adaptor. The rod is sold separately. CHT Threaded Mount Hanger can also be used in combination with the Rod Stand Plate, Hang Mount Stanchion, or Floor Mount Stanchion. This combination will allow the support to be adjusted telescopically to the tube or pipe elevation. Call CSI's customer service at 800.654.5635 for the price and availability of special rod lengths.

Size Range0.24 inch diameters through six inch diameter covering imperial tube, pipe, and copper sizes. ISO and DIN standards and special diameters are available upon request.
Hardware           304 stainless steel (standard)
316 stainless steel (upon request)
FinishStainless steel at a 25 RA
PlasticPolysulfone (black = anchor and gray = guide*)

*A guide allows free axial movement for thermal expansion of tube or pipe.

CHR Rigid Mount Hanger

This is a one piece unit with a rod welded to the hanger housing. Hanger rods are available in lengths up to 96 inches. Standard rod length is six inches. CHR Rigid Mount Hanger can also be used in combination with the Rod Stand Plate, Hang Mount Stanchion or Floor Mount Stanchion. This combination will allow the support to be adjusted telescopically to the tube or pipe elevation. Call CSI's customer service at 800.654.5635 for the price and availability of special rod lengths.

Size Range0.24 inch diameters through six inch diameter covering imperial tube, pipe, and copper sizes. ISO and DIN standards and special diameters are available upon request.
Hardware             304 stainless steel (standard)
316 stainless steel (upon request)
FinishStainless steel at a 25 RA
PlasticPolysulfone (black = anchor and gray = guide*)

*A guide allows free axial movement for thermal expansion of tube or pipe.

CHW Rigid Weld Plate

This is a one piece unit that has a rigid “anchor or guide” support with a weld plate attached to the hanger housing. Compact housing is mounted on a weld plate. This mounting configuration does not offer the dynamic slope adjustment feature. The CHW hanger is ideal for supporting vertical runs and reducing vibrations.

Size Range0.24 inch diameters through six inch diameter covering imperial tube, pipe, and copper sizes. ISO and DIN standards and special diameters available upon request.
Hardware             304 stainless steel (standard), 316 stainless steel also available upon request
FinishStainless steel at a 25 RA
PlasticPolysulfone (black = anchor and gray = guide*)

*A guide allows free axial movement for thermal expansion of tube or pipe.

Threaded Support Rod

To install, thread the rod into housing. Cut the rod in the field to proper length. Field weld the rod to support structure. The rod can also be used in combination with the Telescopic Base Stand, Telescopic Adjusting Stanchion (Hang Mount), or Telescopic Adjusting Stanchion (Floor Mount) Stand. This combination will allow the support to be adjusted telescopically to the tube or pipe elevation.

Size Range3/8 inch outside diameter to one inch outside diameter with different rod lengths and connection threads available.
Hardware Material304 or 316 stainless steel; carbon or electro-zinc plated carbon steel

Create a MyCSI Dashboard to save resources for quick reference, track orders, and talk with experts.